Hello, everyone! Recently I‘ve got myself the MINI VCI cable to play with. As it turned out, with little manual tweaking it is possible, contrary to the popular belief, to get it working under Windows 64-bit.
I bought a cheap Chinese Mini VCI J2534 cable for diagnostics and auto settings. I used it and found that you can do a lot with it through the Toyota Techstream service program.
And here he came to me:
Mini Vci J2534 64 Bit Driver Download
Bonse Mini VCI Cable OBD2 J2534 Programming Diagnostic Cable for Toyota Lexus Scion, USB Diangostic Scanner Cable Supporting TIS Techstream V14 V15 and 32/64 bit Windows 2.9 out of 5 stars 3 $49.99. The MINI-VCI J2534 V1.4.1 USB Interface is a high quality 3rd party communication interface that works with the TIS Techstream software for Toyota and Lexus vehicles in all regions worldwide with multi-language support. The software will allow you to view vehicle metrics, reprogramming, access service documents and much more.
Package includes the drivers for the cable and the program itself-Toyota Techstream with V10.10.018 version.
Cable for diagnosis Mini-VCI J2534
I post links for download: Toyota Techstream 10.10.018 , drivers MVCI_Driver_for.msi
Then I will tell you how to install the driver and the program under Windows 7 or 8.1 x64.
The instruction can be found on the Internet , but I will write it here.
Mini Vci Driver Windows 10
INSTALLATION INSTRUCTIONS Techstream on Windows 7, 8.1 – x64 bit
If you bought the MINI VCI J2534 cable and there is no unpacked driver on the disk, and there is only the MVCI Driver for TOYOTA.msi installer that does not really work when installed on any Windows x64 and gives an error, and it must be installed, otherwise the sw will not work, and it does not matter. This problem can be solved by installing the MVCI Driver for TOYOTA.msi manually as follows:
1. Create a folder on drive C: Temp
2. Copy to our C: Temp folder our MVCI Driver for TOYOTA.msi file
3. With Administrator rights open and run the following command:
msiexec / a “C: temp MVCI Driver for TOYOTA.msi” / qb TARGETDIR = c: temp mvci
this command will extract all content from the MSI file to the C: Temp mvci folder
4. We delete the file MVCI Driver for TOYOTA.msi from the folder C: Temp mvci, it is no longer needed, we can also remove it from the folder C: Temp
5. We go in C: Program Files (x86) and create there folder XHorse Electronics and in it one more MVCI Driver for TOYOTA TIS and move there all the contents from the folder C: Temp mvci
6. Connect the MINI VCI cable to the USB port.
IMPORTANT: When the automatic driver installation process starts, it must be canceled and the device will not be detected.
7. Open the Device Manager and locate the two faulty devices in the list. They will have a yellow icon indicating that Windows could not install the drivers for them. Now right click on the faulty device, select “Update Driver”, then “search on this computer” next “Browse my computer” … and specify the path to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS “(” include subfolders “check box). Click the “Next” button and wait for the drivers to be installed.
Now you should see two new devices: “Controllers USB USB Serial Converter” and “Ports (COM & LPT) USB Serial Port (COM —)”. Where instead of a line will be your figure COM port.
8. Next, go to the path “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS” and run the file “FirmwareUpdateTool.exe”.
In the opened program, click the “Device Info” button. You should see the “connected device” graph filled.
If you see this, then your MINI VCI works under a 64-bit version of Windows and can be used by other programs, such as Techstream.
There is a connection with the cable!
9. Now install Techstream using the software “Techstream.exe” of any version. after installation do not run it yet.
10. To activate it, you need to change the TISFunction = 1 line in the C: Program Files Toyota Diagnostics Techstream Env IT3System.ini file and change it to “0” and save the file.
Now you need to make the program see the cable
So that Techstream sees MINI-VCI under Windows x64, the Registry should be changed like this:
1. Open the Windows Registry Editor, on Windows 8.1 x64, the path is:
[HKEY_LOCAL_MACHINE SOFTWARE PassThruSu pport.04.04 DENSO CORPORATION – TIS Techstream VIM]
But there must definitely be a folder PassThruSupport.04.04 and it has a subfolder (I have DENSO CORPORATION – TIS Techstream VIM) it should have the following parameters
: “Name” = “XHorse – MVCI”
“Vendor” = “XHorse ELECTRONICS Co., Ltd.”
“ConfigApplication” = “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS FirmwareUpdateTool.exe”
“FunctionLibrary” = “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS MVCI32.dll ”
” APIVersion “=” 04.04 ”
” ProductVersion “=” 1.1.0 ”
“J1850VPW” = dword: 00000001
“J1850PWM” = dword: 00000001
“ISO9141” = dword: 00000001
“ISO14230” = dword: 00000001
“CAN” = dword: 00000001
“ISO15765” = dword: 00000001
“SCI_A_ENGINE” = dword: 00000000
” SCI_A_TRANS “= dword: 00000000
” SCI_B_ENGINE “= dword: 00000000
” SCI_B_TRANS “= dword: 00000000
Mini Vci J2534 Drivers
Also there is a section
[HKEY_LOCAL_MACHINE SOFTWARE PassThruSupport.04.04 DENSO CORPORATION – TIS Techstream VIM Parameter]
“Baudrate” = dword: 0001c200
“Comport” = dword: 00000005
“Connect” = dword: 00000000
“Interface” = “AUTOMATIC”
” Firmware “=” x ”
” LE “= dword: 00000000
” LN “= dword: 00000001
” SN “= dword: 00000000
But you can manually do nothing, but simply make changes to the registry by downloading and running this file .
2. Launch Techstream. Go to Setup | VIM select will open the menu in it should be “XHorse-MVCI”
3. Connect the MVCI cable to the USB interface, start the program, then click “Connect to Vehicle” in Toyota Techstream. If everything works, you will be asked to confirm the car / year / model, and if you connect to the car and start it, you will get access to the diagnostic interface.
The first thing to do was to turn off the orange American DRLs. other features stay tuned!
Related posts:
MINI VCI cable review: good
– Works exactly as stated to connect to a Toyota ECU and diagnose/program it. I used it to program a Toyota to recognize a newly added factory remote starter assembly. The directions to set up the driver and software (included) were a bit unorganized but was all there. I set it up on a old Windows XP laptop easily. If you use a newer version of Windows, it can be done but you will have to go to the internet to find help on this. Well built product, arrived quickly, and did what it is designed to do.
– Worked fine on a 2013 Lexus for my primary purpose of registering another key fob. Bought an old Windows XP laptop specifically for use with the software, which apparently also runs unmodified on Windows 7 32-bit. Research will show workarounds for other Windows versions. I had some issues at first since the documentation is not in the root directory on the included software disk, illogically it was put in the folder one of the earlier versions of the software; since my disk included five versions I installed the newest and missed a couple of important steps. Thanks to posters here for help in finding the right process.
– Works great, I can change things on my 4runner very easily. As a note, which is not specified anywhere else that I have seen, you can perform a Zero Point Calibration using this tool, I had some issues with VSC lights coming on, and was able to do the ZPC with this and cleared them out. I would recommend this tool to anyone who owns a Toyota vehicle. I am not sure what models it works for buy I know Tacoma and 4runner are supported.
– Worked for my 2014 Toyota Sequoia, primarily to register a new key and a new alarm remote fob. Instructions were a bit vague, but poking around the internet (especially ToyotaNation.com) got me on the right track. I was also able to shorten the dome-light time upon exit/entry, as well as turn off the seatbelt reminder chime (hey, I’m a big boy now — I KNOW I’m supposed to wear my seatbelt!).
Mini Vci J2534 Driver Windows 7 64 Bit
– Works great on our 2013 Sienna. I even installed on my laptop running Win7 64-bit following the instructions (and some tweaking) found here http://www.toyota-4runner.org/general-discussions/150824-solution-mini-vci-toyota-tis-techstream-8-x-windows-7-8-64-bit.html
– This is NOT the easiest thing in the world to install, setup, and understand if you’re not an auto tech guy. I would not recommend this to anyone who does not feel comfortable screwing around with something potentially unsafe. Because the installation of the software on a Win7 64-bit machine is SOOOOO tricky, I would strongly recommend the average computer user not even attempt it. Stick to a 32-bit OS or Win8 64-bit.
– I give it 4 stars because it really works great, but it is not super user-friendly (granted, it is not designed for the layperson).
– This worked very well to connect Toyota Techstream on my PC to my wife’s 2008 Highlander. Toyota recommends a much more expensive cable, but this one worked just fine with no connection problems at a fraction of the price. I had read other reviews from people who had problems with a 64 bit system, but I’m running it on Windows 7 Enterprise 32 bit version.
– Worked perfectly with an old laptop running XP. Install Java (JRE) first. I was unsuccessful in the little time I spent trying to install the interface driver in Windows 10 64bit.
– The quality of the cable is good. It was shipped with the wrong minidisc, but the supplier had all the correct files available for download online along with detailed installation instructions.
– Surprisingly worked after going through 2 other Chinese cables.
– Used this cable when repairing the battery in my 2005 Toyota Prius. With the help of this cable and the included software we were able to diagnose the problem before beginning the work. It also helped us identify which specific battery modules were failing.
– This Techstream cable may be cheap, or a knock off, but it works, and it works well.
Features that are changeable are dependent on the car. My 01 Celica connected right away, greeted with a prompt confirming it was a 2001 Toyota Celica GT with the 1ZZ-FE engine. Same thing with my 00 MR2 spyder. Basic info, no real changes could be made to those older cars.
Tried it on my mom’s 06 avalon, and I saw many more options. Everything from time delay of alarm from key unlock to calibrating the passenger seat weight sensor and even adjusting climate temp to be accurate to the temp desired and automatic headlight sensitivity. I even toned down the volume of the “key in ignition” reminder. Live readings of sensors are very helpful when trying to find a root cause of some issue and it records the data, too, so you can just drive and check the info later.
Both the MR2 and the Avalon, as well as a 99 Solara my brother owns have immobilizers built in, so you can add keys, clear lost keys, etc from this program. If you do an ECU swap and need to register a new master key, you WILL need someone with clearance to translate a seed code into a passcode.
Mini Vci J2534 Driver Windows 10 64 Bit Free Download
No flash line, so you cannot reflash an ECU.
Only complaint would be the ease of installation of the software. Yes the software appears to be stolen, yes the drivers are for a name brand unit, yes the cd included is a 3 inch cd that someone made in their basement in a burner (mine even had a little panda on it…). I am in IT and with workarounds found on Toyota forums, you can install on a 64 bit system. I have it on three computers, an old xp laptop that I now leave in my garage, A mini computer running windows 7 32 bit for driving around collecting sensor data, and my windows 8 64 bit laptop. All three work fine.
Do NOT run the updater for the drivers, it in many ways comes back to being spyware/virus. Simply delete or never run and you are good to go.
Toyota Mini Vci J2534 64 Bit Driver Download
In summary, this is a useful tool that will more than likely save some serious bucks at the dealer or mechanic if you pinpoint an issue before bringing it to them. Really, it was cheaper than my cheapest of the cheap OBD scanner, yet even has a basic obd scan built into it. If this tool ever breaks, I would instantly replace.